The Mango has a fully enclosed drive-chain. This is a very important feature for a velomobile. Because abrasive dirt stays on the outside of the body, maintenance is very low compared with most bicycles. All that's needed for a long life with little hassle is that you regularly oil the chain (a few drops every 500 km) and wipe off any excess. You also need to put a couple of drops of oil into the top of the suspension struts. Some people have ridden as much as 40000 km on their first chain by taking care like this. I was a bit more lax with the regular oiling and just managed 12000 km. However, this is still a very good chain life. Chains exposed to the elements will often last only a quarter so long.
Testing with a chain wear checking tool (new chain above, old chain below) it was apparent that my main chain had "stretched" a little beyond the point where I should already have replaced it. To say a chain has "stretched" is a little misleading. The metal does not stretch. What actually happens is that abrasive dust gets inside the bearings in the chain links themselves, wearing it out from the inside. The result is that chain no longer fits the chainrings correctly and it starts to wear them out. Also efficiency is lost. However, all this happens later and to a lesser extent if your drive-chain stays clean.I replaced the existing KMC chain with brand new SRAM 9 speed chain.
There's now quite a bit of play in my steering so I also need a new plastic block for the universal joint. That will come from the Ligfietsgarage next week.
To check your transmission you need just the chain wear checking tool. To replace it you need chains and other parts available here. For a main chain of the Mango you need about 2.5 normal chains (buy 3 the first time you do the job, and you may need just 2 the second time) and for the secondary chain you need just one.
I'm looking forward to more adventures over the next 12000 km, but shouldn't have to do much maintenance.
Read my review of the Sinner Mango Velomobile.



